# File generated by xf86config.
# and additional hand edited by Rene Rebe - T2 Project
#
# YOU MUST ONLY MODIFY THE CARD SECTION AND SOME MONITOR SETTINGS
# TO GET A WORKING X CONFIGURATION.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
Section "Module"
Load "dbe" # DBE (double buffer extension)
Load "ddc" # Display Data Channel extension
# This loads the miscellaneous extensions module
SubSection "extmod"
# Option "omit xfree86-dga" # don't initialise the DGA extension
# Option "omit XFree86-VidModeExtension" # disable mode-switching-supoprt
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# Load "glx" # GLX extension (OpenGL visuals)
# Load "dri" # Direct Rendering Interface extension (OpenGL)
# Load "v4l" # Video 4 Linux extension (provides a xv adapter)
EndSection
# **********************************************************************
# Extensions section -- this section is used to specify
# which extensions to enable.
# **********************************************************************
Section "Extensions"
# Option "XEVIE" "Disable"
Option "Composite" "Enable"
EndSection
# this enabled normal users to use DRI - the Direct Rendering Extension.
# it is also possible to use a group to control access.
#
Section "DRI"
Mode 0666
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11/lib/X11/fonts/CID/"
FontPath "/usr/X11/lib/X11/fonts/PEX/"
FontPath "/usr/X11/lib/X11/fonts/Speedo/"
FontPath "/usr/X11/lib/X11/fonts/Type1/"
FontPath "/usr/X11/lib/X11/fonts/cyrillic/"
FontPath "/usr/X11/lib/X11/fonts/encodings/"
FontPath "/usr/X11/lib/X11/fonts/freefont/"
FontPath "/usr/X11/lib/X11/fonts/latin2/"
FontPath "/usr/X11/lib/X11/fonts/local/"
FontPath "/usr/X11/lib/X11/fonts/misc/"
FontPath "/usr/X11/lib/X11/fonts/sharefont/"
FontPath "/usr/X11/lib/X11/fonts/TTF/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
# Uncomment this to enable multi-head Xinerama support
# Option "Xinerama" "true"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "250 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
# Option "XkbLayout" "de" # german keyboard layout
# Option "XkbVariant" "nodeadkeys" # normally not wanted
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
# normal wheel mouse ...
#
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
# Option "Protocol" "Auto"
# Option "Protocol" "Microsoft"
# Option "Protocol" "PS/2"
# Option "Device" "/dev/tts/0"
# Option "Device" "/dev/misc/psaux"
Option "Buttons" "5"
Option "ZaxisMapping" "4 5"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "Spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "Spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "Synaptics1"
# Driver "synaptics"
# Option "ZaxisMapping" "4 5 6 7"
# Option "Device" "/dev/input/mouse0"
# Option "Protocol" "auto-dev"
# # Option "LeftEdge" "1700"
# # Option "RightEdge" "5300"
# # Option "TopEdge" "1700"
# # Option "BottomEdge" "4200"
# Option "FingerLow" "25"
# Option "FingerHigh" "30"
# Option "MaxTapTime" "180"
# Option "MaxTapMove" "220"
# Option "TapButton2" "3"
# Option "TapButton3" "2"
# Option "VertTwoFingerScroll" "true"
# Option "HorizTwoFingerScroll" "true"
# Option "VertScrollDelta" "5"
# Option "HorizScrollDelta" "5"
# Option "MinSpeed" "0.40"
# Option "MaxSpeed" "1.00"
# Option "AccelFactor" "0.05"
# Option "SHMConfig" "on"
# EndSection
#
# Section "InputDevice"
# Identifier "Touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "Touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "Tablet1"
# Driver "summa"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# Option "BaudRate" "19200"
# Option "DataBits" "8"
# Option "StopBits" "1"
# Option "Parity" "Odd"
# Option "FlowControl" "Xoff"
# Option "VTime" "10"
# Option "VMin" "1"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor1"
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS !!
# normally uncomment this lines
# HorizSync 24.0 - 80.0
# VertRefresh 50-100
# overwrite the screen dimensions (in mm) e.g. to get another virtual dpi
# value
# DisplaySize 345 260
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# VertRefresh 50-100
# some mode examples 1,2 selfmade - 3 from fbset
# (only needed for low-level tricks, exotic Laptops or other LCD's)
#
# Mode "1152x900"
# DotClock 120
# HTimings 1152 1200 1312 1528
# VTimings 900 910 946 985
# EndMode
# Mode "1152x900-2"
# DotClock 100
# HTimings 1152 1200 1312 1528
# VTimings 900 910 946 985
# EndMode
# Mode "1152x864"
# DotClock 105.810
# HTimings 1152 1184 1312 1504
# VTimings 864 868 872 902
# Flags "-HSync" "-VSync"
# EndMode
# for framebuffer devices you might want to simply add
# the 'fbset -x' output here.
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
Section "Device"
Identifier "Card1"
# Use this for framebuffer devices - should work on most systems.
Driver "fbdev"
Option "fbdev" "/dev/fb/0"
# Driver "vga" # mga, ati, nv, sis, vesa ...
# # Option "BackingStore"
# # Some driver accept an UseFBDev option (e.g. radeon) to switch the
# # mode via the Linux framebuffer layer. Needed e.g. as workaround for
# # iBooks.
# # Option "UseFBDev"
# # The BuID is only required for multi-monitor configs or some fbdev drivers
# # BusID "PCI:1:5:0"
# # Screen 0 # Screen of a dual-head mga card
# # Option "NoHal" # do not use the binary-only Matrox HAL library
# # Option "AGPMode2x"
# # Option "MergedFB" "true" # lightweight multi-head
# # Option "CRT2Position" "RightOf"
EndSection
# Matrox Millenium 4xx, Ati or NVidia second-head
#Section "Device"
# Identifier "Card2"
# Driver "mga" # or other dual-able cards like ati, nv
# # Option "BackingStore"
# BusID "PCI:1:5:0"
# Screen 1
#
# # Option "NoHal" # do not use the binary-only Matrox HAL library
# # Option "AGPMode2x"
# # Option "Tv" "yes"
# # Option "TVStandard" "PAL"
# # Option "CableType" "SCART_COMPOSITE"
#EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
DefaultDepth 24
Subsection "Display"
Modes "1024x768" "800x600" "640x480"
EndSubsection
EndSection
#Section "Screen"
# Identifier "Screen2"
# Device "Card2"
# Monitor "Monitor1"
# DefaultDepth 16
#
# Subsection "Display"
# Modes "1024x768" "800x600" "640x480"
# EndSubsection
#EndSection
#Section "Screen"
# Identifier "ScreenTV"
# Device "CardTV"
# Monitor "Monitor1"
# DefaultDepth 16
#
# Subsection "Display"
# Depth 16
# Modes "640x480"
# ViewPort 0 0
# EndSubsection
#EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen1" # LeftOf "Screen2"
# Screen "Screen2"
# Screen "ScreenTV"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
# It is possible to specify secondary input devices which might not
# be pressend on X startup. Nice for laptops with temporary external
# mices ;-)!
# InputDevice "Mouse2" "SendCoreEvents"
# InputDevice "Tablet1"
EndSection